Templates
Gathered these from around the web - use these when working w/ your flats
For PDF files - right-click and "Save As" to copy them to your computer.
- AK Receiver Blueprints
- Lower Rails
- Side-Folding AK-100 Stock
- Underfolder Stock
- AMD-65 Rear Sling Swivel
- AMD-65 Rear Trunion and Sling Swivel
- AK-100 pistol grip plate
- Safety Selector Stop
- Yugo SKS Grenade Launcher Spigot
- Yugo M70 Grenade Launcher Spigot
- AKS-74U (Krinkov) Barrel Profile
AK Receiver Blueprints
PDF templates
AK47receiverplan_rev2.pdf (Dr. Strangelove's plan)
AK_Template_Ace.pdf (older)
AK_Template_Acev2.pdf (newer)
DXF format file
Use the eval version of DeltaCad to read/print this file.
IMPORTANT: Set regions to print at a 1:1 setting:
post-14-28041-AK47TEMPLATE.dxf
(zipped) dxfTEMPLATE.zip
This has proven to be the most accurate template, and I have measured this against my Norinco NHM-91 and my Hesse/Vulcan receiver - both matched up correctly. YMMV. The good thing about this is that you can edit it within your CAD program if you wish.
Visio Template
This was converted from the DXF template for use with Microsoft Visio. This is editable from directly within Visio. Used Visio 2003 to convert it. The Microsoft Visio viewer utility can be downloaded for free from Microsoft.
Expect to see this template updated if/when new developments occur.
Bizon Receiver Template
(pending)
Lower Rails
Template
(from hunterwarrior):
Side-Folding AK-100 Stock
The "starting point" is the big hole, from which all the other measurements are made. That's why when you start to measure, you'll notice all measurements are in relation to that hole. It is referenced from the upper rivet hole, which is identical on all AKs.
That said, you COULD print this out and paste on the receiver, because it is to scale. Best to measure, however.Template scans:
(Full-sized pic):
(Quarter-sized pic):
Same template in PDF (scan quality so-so):
Underfolder Stock
Assembly Diagram
Polish:
Generic, both Milled and Stamped
(from aks-74u website)normal:
enlarged 150%:
Template Scans
(from DrugRunR)
Full-Size:
Half-Size:
AMD-65 Rear Sling Swivel
Credit to Nartron
AMD-65 Rear Trunion and Sling Swivel
More info on its use is located on my AMD construction page, here
AK-100 Pistol Grip Plate
More info on its use is located on my trigger guard construction page, here
Safety Selector Stop
Yugo SKS Grenade Launcher Spigot
Yugo M70 Grenade Launcher Spigot
AKS-74U (Krink) Barrel Profile
